A bathroom remodel offers an ideal opportunity to enhance one of your home’s most essential rooms. As you develop your plans, one key consideration is integrating the right vanity size to match your available space.
The bathroom vanity impacts everything from storage to room layout to aesthetics. By thoughtfully coordinating vanity dimensions with your overall design, you can optimize both functionality and visual appeal.
According to Networx, bathroom remodels provide two major benefits: enhancing utility through improved storage and workflows and elevating visual design. However, achieving these goals requires careful planning – especially around vanity.
Factors such as the location of existing pipes, traffic patterns, and the size constraints of the room can complicate the selection of a vanity. When oversized, a bulky vanity can create bottlenecks and dominate the room. If undersized, it looks oddly proportioned or provides inadequate storage. By properly sizing and placing your vanity during the planning process, you can avoid these issues.
Factors To Consider When Choosing Vanity Size
When selecting a vanity, you’ll need to decide what size works best for your available space. Standard bathroom vanity sizes range from narrow 24-inch single vanities to larger 48-72-inch double vanities. Refer to complete dimensions and sizing charts to choose what fits your bathroom footprint.
You should also consider the size of your bathroom. Per Remodeling’s Cost vs Value report:
- Older, small bathrooms average under 100 square feet
- Post-1980 homes trend toward 100+ square feet
- Luxury new-build master baths average 160 square feet
Before moving forward, it’s important to set realistic budget expectations. As shown in the pie chart below depicting average bathroom remodel costs, expenses can vary greatly depending on the scale of your project.
Data Source: Remodeling Magazine
Match your vanity size to your available space. Overstuffing a tiny vintage bath with an oversized double vanity will create bottlenecks. Conversely, a 24-inch vanity can look lost in a spacious contemporary bath.
How To Integrate Vanity Size With Overall Bathroom Remodeling Plans
Integrating vanity size starts with understanding bathroom dimensions. Measure the total square footage as well as the open wall space to determine maximum cabinet sizes. Reference the standard sizes of 24, 30, 36, 48, 60, or 72 inches when taking measurements.
Next, sketch a rough layout marking existing plumbing locations. Compare proposed vanity sizes and placements against plumbed areas. Determining if piping must move is crucial for accurately estimating costs.
According to Forbes, “Changing the location of bath fixtures like the toilet, vanity, and shower dramatically increases the cost of plumbing labor because the old piping will need to be removed and rebuilt”. Carefully weigh the tradeoffs of adjusting vanity width versus moving drainage lines.
Also, evaluate room traffic patterns. Will doors and walkways become bottlenecked by an oversized vanity? Consider alternate layouts that alleviate congestion.
Finally, refine your dimensions. A 30-36-inch single vanity or 48-inch double may fit your space constraints while minimizing plumbing revisions. Aligning to standard vanity sizes also ensures readily available stock cabinets and countertops during installation.
By factoring in room size, piping locations, layout, and traffic flows when integrating your vanity early on, you can develop a cohesive bathroom remodeling plan optimized for both functionality and cost.
Picking The Perfect Sink
The sink is an important part of your new vanity. Take time to find the best sink for your needs. There are two main types of sinks:
1. Undermount Sinks Attach Below The Counter
The counter overlaps the edges of the sink so crumbs and water do not get caught in cracks. Undermount sinks create a sleek, smooth look. But drops of water can collect on the counter.
2. Vessel Sinks Sit On Top Of The Counter
They come in many shapes like circles, squares, and ovals. Vessel sinks are decorative and eye-catching. But they leave sink and counter edges exposed so you have to wipe them often.
You Should Also Consider What Sink Material You Want:
- Porcelain is classic and sturdy but can chip over time.
- Stainless steel resists stains and rust but scratches easily.
- Solid surfaces like quartz are durable but expensive.
The size of your sink matters as well. Consider your habits – do you require a deep basin for bathing children? Wide double sinks allow two people to use the vanity at once.
Finally, make sure to coordinate the faucet and handles. Widespread faucets have separate hot and cold handles while single-handle faucets mix water in one spout.
Choosing the right sinks and faucets improves your vanity’s look and utility during your remodel.
Creative Storage Solutions
Storage is a top priority for most bathroom remodels. Well-designed storage keeps all your essentials organized but out of sight. Here are creative ideas to maximize your storage with a new vanity:
- Pull-out shelving inside lower cabinets neatly stores extra toilet paper and cleaning supplies. Roll-out tilt trays can hold hair dryers or curling irons.
- Adjustable shelves let you customize cabinet interiors to fit tall bottles or stack folded towels. Glass shelves provide visibility.
- Spacious drawers with built-in dividers keep makeup, hair products, or medications sorted. Full extension drawer glides make items easy to access.
- Lift-top cabinets create hidden storage under the sink basin. Look for waterproof interiors to organize cleaning supplies.
- Tower cabinets positioned next to the vanity provide shelving for overflow items or laundry bins.
- Wall cabinets hung over the toilet expand storage and display decorative items.
When planning your new vanity, consider vertical options as well. Wall-mounted cabinets, floating shelves, and mirrored medicine cabinets can provide additional space.
By fully utilizing all possible storage areas – both in and around your new vanity – you can keep all your bathroom necessities organized but out of sight.
Key Takeaways:
- Measure available space to guide vanity size
- Work within existing plumbing locations if possible
- Compare costs: larger vanity vs. moved plumbing
Frequently Asked Questions About Bathroom Vanities
- What is the standard height of a bathroom vanity?
The standard height for a bathroom vanity is 32 inches.
- What is the standard depth of a bathroom vanity?
The standard depth of a bathroom vanity is 21 inches.
- What is the standard width of a bathroom vanity?
Standard bathroom vanity widths range from:
- 24 to 72 inches
- Common sizes: 24, 30, 36, 48, 60 & 72 inches
- What’s the cost of a bathroom remodel?
According to Remodeling Magazine:
- Minor DIY (paint, hardware): $100s
- Full professional remodel: $10,000 average ($20,000+ high-end)
- ROI on resale: 70%
- What percentage of my home’s value should I spend?
Money Magazine recommends spending:
- 10% of home value on master bath remodel
- 5% of home value on standard bath or powder room remodel
Conclusion
Integrating vanity size into your overall bathroom layout is crucial for functionality and aesthetics. Evaluate your existing space, work within current plumbing locations when possible, and weigh the pros and cons of adjusting vanity width vs. moving pipes. Considering these crucial details early in the planning process will guarantee that your new bathroom remodel, with its beauty and functionality, remains satisfying for years to come.
Additionals:
