5 Tricks to Unclog Blocked Toilet Like A Pro

Home Improvementby Mashum Mollah03 February 2020

Blocked Toilet

One of the most uncomfortable situations that all men had to face is causing a blocked toilet in someone else’s home. Imagine the stress that you might feel if you flush the toilet, but instead of getting rid of its content, all the water only comes up together with everything in it. Worse, someone might also use the toilet after you.

Fortunately, there are several solutions to fix a blocked toilet. You can follow these tried and tested tips to save yourself from an extremely awkward situation.

5 Tricks to Unclog Blocked Toilets Like A Pro:

Prevent the toilet bowl from over spilling

One of the leading causes of blocked toilet problems is the overflowing of water. If that is the case, you need to take the tank’s lid off and close the toilet flapper. There might be a possibility that flushing the toilet bowl can flood the entire bathroom floor. To avoid this from happening, you must take off the top before pulling the trigger. Then place one of your hands close to the flapper while the other one puts pressure on the flusher. Once the water begins to rise, you can already stop the water from toppling over. After learning these techniques, you might think of pursuing a career in plumbing. Check the schools costs for plumbers here.

Pick the right plunger 


After fixing the overflowing water problem, you can begin to use the plunger to address the blocked toilet situation. You will know if you are using the right plunger for the toilet if it can seal the toilet bowl correctly. Most of the time, the funnel-cup plungers work best to fix the clog. These types of plungers come with a flange that extends towards the tip of the rubber cup.

Prepare the plunger 

If the plunger that you found in the bathroom is still unused, it may not be as effective as the old ones that are already pliant. To warm up the plunger, run it first under the hot water before using it. This step will soften up the rubber and allow it to have a better seal on the toilet.

Submerge the plunger correctly 

To optimize the effectiveness of the plunger, you must stick it properly in the bowl so it can develop a steady seal on top of the exit hole. Aside from doing a firm downward push, you also need to practice a proper pullback to unclog the toilet bowl effectively. You have to do a steady up and down stroke routine with the plunger then flush the toilet.

Once the water clears from the toilet, it means that you managed to remove the blockage successfully. If it begins to overflow again, you need to close the flagger to prevent the water from seeping into the bowl. Repeat the plunge and flush routine until you finally remove the clog.

Learn different tricks from the pro

There are several tricks that you can do to unclog the toilet faster. First, you may pour hot water into the bowl and let it sit for several minutes. The heat from the water will help break down the contents of the toilet bowl. If a dishwasher detergent is available inside the bathroom, you can also use it to help remove the clog as well.

If you can access the kitchen, you may also pour a cup of baking soda and vinegar into the toilet bowl. The chemical reaction between the two kitchen staples can help break down the blockage.

These are just some of the tricks that you can do to fix the blocked toilet problem on your own. But if your efforts are not enough, you may consider calling a professional plumber to solve the situation. The pros may assess if the problem lies beyond the toilet bowl and require a more thorough repair.

Read Also:

Mashum Mollah

Mashum Mollah is an entrepreneur, founder and CEO at Viacon, a digital marketing agency that drive visibility, engagement, and proven results. He blogs at thedailynotes.com/.

View All Post

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like